Adjustable Tilt Stainless Steel Monument Adapter

by Seco

MFR#: 2072-30

CAD $436^.00 - CAD $436^.00

List Price: CAD

CAD $436^.00

CAD $436^.00 - CAD $436^.00

CAD $436^.00

Store Pickup: List of available stores available on the Checkout page.

Adjustable Tilt Stainless Steel Monument Adapter - CAD $436^.00

CAD $436^.00

*Must Purchase 1 for Adjustable Tilt Stainless Steel Monument Adapter

The cart will thereforce automatically set Qty to 1 when you order this product

IN STOCK Free Shipping (USA) Ships Out Within: 24 - 48 Hours Shipping Date By: 12/28/2024

? California Proposition 65 WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

SECO’s new #2072-Series 303 stainless steel adapters are the perfect link between your GPS antenna and mast for your network antenna solution.

The brass 5/8 x 11 male stud is removable and adjustable in azimuth. It is held in location by two set screws.

The adapters are leveled by three adjusting screws with a tilt range of +/- 7 degrees.

The height above the pivot point to the stud shoulder is 1.37 inches (3.50 cm).

The height below the brass 5/8 x 11 stud to the shoulder is 0.463 inches (1.18 cm).

The #2072-Series’ female base is threaded to match the male pipe used.

The axis height is engraved on the outside of the monument.

Topcon Antenna GR3-1A users, be sure to order any of these monument adapters and extension #2072-001. The extension adds 1.00-in (2.54-cm) to the height, which enables easy access to cabling.

Number:

For Use With:

Special Adapter:

2072-001

Use with Topcon GR3-1A Antenna

2072-30

MPT 1.5 x 11.5-inch pipe TPI

2072-31

MPT 2 x 11.5-inch pipe TPI

2072-32

MPT 3.5 x 8-inch pipe TPI

2072-33

Male 5/8 x 11 threads

Tiger Supplies offers a 30-day return policy from date of shipment for this product, subject to a 15% restocking fee, in addition to the return shipping charges. The product must be in new condition and in its original packaging. We take the responsibility to make sure this product arrives in a brand new working condition. Should your item arrive damaged, we will take full responsibility and replace the product at no cost to you.

Order Cancellations will incur a 15% fee.

For complete details of our return policy and process, please refer to our general return policy page.