TECH 500 DP Digital Protractor

The Stabila TECH 500 DP Digital Protractor gives accurate angle measurements in a wide range of construction applications. This angle gauge is especially suitable for production operations like performing maintenance on and setting machines, for long-term measurements, and checking and monitoring processes. Tech 500 also proves quite helpful in the quality assurance process for measuring key values and in special-purpose mechanical engineering for easy alignment of systems during commissioning.

Features: The TECH 500 DA packs a bunch of useful and practical features that help with many applications. The gauge can quickly and accurately determine and transfer interior and exterior angles in the range of 0° – 360° (4 x 90°). The precision of this device is very high, with an accuracy of ± 0.01° in precision display mode and 0.1° in rough display mode and it features an IP 65 class protection against duct and water which makes it ideal for even harsh construction environments. The digital display is assisted with an LED backlight for easy reading in the dark and has clear large digits that automatically rotate in reverse position. Tech 500 comes with a rugged nylon carrying case for better portability and storage. The electronic module is powered by 2 readily available AA batteries, making it easy to maintain.

Functions: The Tech 500 has several useful functions built into it, that can be controlled with a set of tactile buttons at the side of the display. The display's backlight can be switched on or off according to need. The electronic module has a REF function, that allows a reference angle to be accepted, saved, and then transferred to other components, and a HOLD function that saves the measured value. The module has several display modes including °, %, mm/m, in/ft and the reading can be output as a decimal and a fraction.